🏐 Iphone 11 Face Id Not Working After Screen Replacement

Face ID unlocking an iPhone 13 with a swapped screen (left). When the public 15.2 release arrived, we grabbed two iPhone 13 Pro Max phones. We set one up as the testing unit, and the other as the parts donor. The testing phone had all original parts, had Face ID set up and working, battery health showing, True Tone working, and full camera If you are having problems with Face ID after a software update. To reset Face ID, go to Settings > Face ID & Passcode > Reset Face ID. You will then need to enter your passcode to confirm the reset. Once you have reset Face ID, you will need to set it up again. To do this, follow the on-screen instructions. Press and hold the Side button and either the Volume button until you see "slide to power off". Slide from left to right to turn off your iPhone and wait for some moments, then press and hold the Side button again to turn on the device. 2. Check Your Face ID Settings. If you didn’t remove the parts before attempting the glass replacement they have probably become damaged. For someone who doesn’t do this for a living I would suggest you should have removed the: · Screen. · Logic board. · Rear cameras. · Front cameras. · Charging dock. The iPhone X has a lot of parts which have sensors. 1. Tear down the phone and grind new display touch module. 1.1 Power off the phone and tear down the original display screen. 1.2 Replace the face ID module from the original display to the new iPhone display. 1.3 Place the new iPhone display on the table, with the touch module on the upside. 1.4 Use the special machine to grind the module and Hold and press the top button and wait for a while. Now, again press the hold button until you see the Apple logo. Once you are done with restarting the device, try Touch ID again to see if it’s working or not. If this didn’t work, try method number 2, which is backing up your iPhone. .

iphone 11 face id not working after screen replacement